NVS DV-2020BT Software Update

Follow the below for each Software Update
(Note: Only have the single update file on the USB drive for each update)
  1. Download the desired Software Update ".bin" file
  2. Copy the ".bin" file onto a FAT32 USB drive
  3. With the NVS DV-2020BT powered on, insert the USB drive
  4. A dialog box will show asking you to confirm the software update
  5. Touch the green tick to start the update
  6. IMPORTANT: Keep the radio / vehicle on until the update is complete
  7. The radio will reboot once the update is complete
  8. Done! You can now remove the USB stick.

Software Updates

LJ6618.bin

- Fixes date increasing one day each hour when key off
- Steering wheel control (SWC) detection improvements (Note: Best to learn controls while engine running)
- Add backing camera trigger delay of 200ms for improved camera signal detection

ahkft.bin

- Fix noise on 0 volume
- Front camera default set to off (fixes reverse camera issues)
- Additional vehicle boot logos added - Holden, Fiat, Subaru