Wavetech Imports Christchurch New Zealand

RPI-PIRACK | Piface Pirack for Raspberry Pi

PiRack is an expansion board allowing the connection of multiple IO boards to the Raspberry Pi.

With the ability to connect up to 4 additional boards, the plug in PiRack allows users ultimate flexibility in their Raspberry Pi programming. Powered separately to the Raspberry Pi (power supply required) means that the PiRack will not affect performance of your Raspberry Pi.

This carrier card is part of the PiFace series and can be used with most IO expansion boards that are compatible with the Raspberry Pi IO header. PiRack also enables the Pi Camera Module to be used at the same time. By taking IO expansion boards directly off the Raspberry Pi, PiRack enables the camera module to easily connect onto the Raspberry Pi using to the top mount CSI interface.

Features
• Connect up to 4 accessory boards to the Raspberry Pi
• 5V barrel jack for additional power (5.5mm OD  2.1mm ID Barrel)
• Jumpers to select between internal and external power
• Daisy chain multiple PiRacks for even more expansion
• Re-address SPI accessory boards with jumpers to swap
• SPI chip enable lines
• Maximum pin to pin voltage is 20V

Compatible With
• Raspberry Pi Model A+ (Uses first 26 pins of GPIO header only)
• Raspberry Pi Model B
• Raspberry Pi Model B+ (Uses first 26 pins of GPIO header only)
• Raspberry Pi 2 Model B (Uses first 26 pins of GPIO header only)