Nakamichi NA3600M | DVD/CD Receiver with Bluetooth & USB
Nakamichi NA3600M, our DVD 2 DIN receiver with build in Android mirrorlink for ease of access with your mobile phone and is compatible with a wide array of CD and DVD formats such as DVD/VCD/MP3/MP4/CD-R/CD-RW/DIVX.
Supports both FM/AM radio channels as well as RDS for receiving important traffic updates while you are on the road.
Of course, not forgetting Bluetooth input, for hands free calling, as well as streaming your high resolution music files through to your vehicle's sound system.
Built in 10 band EQ adjustment and preset EQs lets you adjust the sound to match your style of music, so you'll never sound out of tune.
Features
• 6.75" 800x480 Touch-Screen Display
• Built-in Bluetooth (with Audio Streaming)
• Built-in Microphone (external microphone compatible)
• Front USB Input*
• Rear USB Input (Charging Only)
• DVD/CD Player
• Supports MirrorLink (Some Android Phones Only)
• Rear Audio / Video Input (use AUX2 for 3.5mm input)
• ISO Connectors
• MP3/WMA/FLAC/MPEG4/MKV/FLV/DIVX/H264 Playback
• Supports 640x480, 1280x720, 1920x1080 Video Resolutions
• RDS
• Loudness
• Separate Bluetooth Call Volume
• 10 Band EQ
• Brightness Control
• Wallpaper Adjustable
• Blue Key Illumination
• Sound Response
• Rear Video Output (x2)
• RCA Audio 4V Outputs (Front L/R + Rear L/R)
• Subwoofer RCA 3V Output
• Reverse Camera Input
• Front Camera Input
• Wired Remote Input
- with Learning Function
- see HERE for some common vehicle SWC positions
• Remote Control (CR2025 Battery Included)
• Mounting Cage & Trim Included
Specifications
• Power Requirement: 12V DC Negative Ground (11V-16V acceptable)
• FM Tuning Range: 87.5 - 108.0 MHz (NZ frequency)
• AM Tuning Range: 531 - 1,602 kHz (NZ frequency)
• Speaker Output: 50W x 4 (4Ω)
• Speaker Impedance: 4Ω (4-8Ω acceptable)
Size
• Standard Double Din Size
• Width: 178mm
• Height: 100mm
* USB port is not compatible with iPod/iPhone/Android devices
However, you may still be able to connect your device via rear A/V in or Bluetooth
User manual
Install Notes
• If using ISO adapters & SWC, the SWC wires need to be moved over into ISO adapter
• You may need a USB Extension Cable if using rear USB (charging only) as cable is short
• The radio Auto Antenna wire can also be used as an Amp Turn on wire
• Default Bluetooth device name is NA3600M and code is 0000
• You need to switch to R-Mic in the unit settings if using an external microphone
|
